[<<Previous Entry]
[^^Up^^]
[Next Entry>>]
[Menu]
[About The Guide]
Control Change
Message on specific channel to change a control setting.
Data is send in the following form:
1011nnnn Control Change; n=Channel [0.15=channel 1.16]
0ccccccc c=Controller Number [0.31= MSB of controller 0.31]
[32.64= LSB of controller 0.31]
[64.95= Switches 0.31]
[64.121 are not defined]
[122.127 are channel mode messages]
0vvvvvvv v=Value [0.127]
Transmission will take 0.96 ms.
This page created by ng2html v1.05, the Norton guide to HTML conversion utility.
Written by Dave Pearson